Chapter 7 VLAN
7.5.3 Configure a Static VLAN or Private VLAN
Use this screen to create 802.1Q VLAN IDs and set VLAN members for Normal (static) or Private
(Primary, Isolated or Community) VLANs. You must create VLAN IDs for Private (Primary,
Isolated or Community) VLANs before configuring Advanced Application > Private VLAN. See
Section 7.1 on page 81
for more information on 802.1Q VLAN.
To configure a static or private VLAN, click Static VLAN in the VLAN Status screen to display the
screen as shown next.
Figure 48 Advanced Application > VLAN > Static VLAN
GS3700/XGS3700 Series User's Guide
86