Setting Up Login Accounts - ZyXEL Communications GS3700 Series User Manual

Table 196 Management > Access Control > SNMP > User (continued)
LABEL
Password
Group
Add
Cancel
Clear
Index
Username
Security Level
Authentication
Privacy
Group
Delete
Cancel

43.4 Setting Up Login Accounts

Up to five people (one administrator and four non-administrators) may access the Switch via web
configurator at any one time.
• An administrator is someone who can both view and configure Switch changes. The username for
the Administrator is always admin. The default administrator password is 1234.
Note: It is highly recommended that you change the default administrator password
(1234).
• A non-administrator (username is something other than admin) is someone who can view but
not configure Switch settings.
Click Management > Access Control > Logins to view the screen as shown.
Chapter 43 Access Control
DESCRIPTION
Enter the password of up to 32 ASCII characters for encrypting SNMP packets.
SNMP v3 adopts the concept of View-based Access Control Model (VACM) group. SNMP
managers in one group are assigned common access rights to MIBs. Specify in which
SNMP group this user is.
admin - Members of this group can perform all types of system configuration, including
the management of administrator accounts.
readwrite - Members of this group have read and write rights, meaning that the user can
create and edit the MIBs on the Switch, except the user account and AAA configuration.
readonly - Members of this group have read rights only, meaning the user can collect
information from the Switch.
Click this to create a new entry or to update an existing one.
This saves your changes to the Switch's run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel
to save your changes to the non-volatile memory when you are done configuring.
Click Cancel to reset the fields to your previous configuration.
Click Clear to reset the fields to the factory defaults.
This is a read-only number identifying a login account on the Switch. Click on an index
number to view more details and edit an existing account.
This field displays the username of a login account on the Switch.
This field displays whether you want to implement authentication and/or encryption for
SNMP communication with this user.
This field displays the authentication algorithm used for SNMP communication with this
user.
This field displays the encryption method used for SNMP communication with this user.
This field displays the SNMP group to which this user belongs.
Click Delete to remove the selected entry from the summary table.
Click Cancel to begin configuring this screen afresh.
GS3700/XGS3700 Series User's Guide
362