Arp Setup; Arp Learning - ZyXEL Communications GS3700 Series User Manual

Therefore in the following example, the Switch can learn host A's MAC address from the ARP
request sent by host A. The Switch then forwards host B's ICMP reply to host A right after getting
host B's MAC address and ICMP reply.

41.2 ARP Setup

Click IP Application > ARP Setup in the navigation panel to display the screen as shown. Click
the link next to ARP Learning to open a screen where you can set the ARP learning mode for each
port. Click the link next to Static ARP to open a screen where you can create static ARP entries on
the Switch.
Figure 235 IP Application > ARP Setup

41.2.1 ARP Learning

Use this screen to configure each port's ARP learning mode. Click the link next to ARP Learning in
the IP Application > ARP Setup screen to display the screen as shown next.
Chapter 41 ARP Setup
A
ARP Request
ARP Reply
ICMP Request
ICMP Reply
GS3700/XGS3700 Series User's Guide
ARP Request
ARP Reply
ICMP Request
ICMP Reply
340
B