Configure Vlan Port Settings - ZyXEL Communications GS3700 Series User Manual

7.5.4 Configure VLAN Port Settings

Use the VLAN Port Setting screen to configure the static VLAN (IEEE 802.1Q) settings on a port.
See Section 7.1 on page 81
link in the VLAN Status screen.
Figure 49 Advanced Application > VLAN > VLAN Port Setting
The following table describes the labels in this screen.
Table 33 Advanced Application > VLAN > VLAN Port Setting
LABEL
GVRP
Port
*
Ingress Check
PVID
GVRP
Chapter 7 VLAN
for more information on 802.1Q VLAN. Click the VLAN Port Setting
DESCRIPTION
GVRP (GARP VLAN Registration Protocol) is a registration protocol that defines a way for
switches to register necessary VLAN members on ports across the network.
Select this check box to permit VLAN groups beyond the local Switch.
This field displays the port number.
Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all ports. Use this row
first to set the common settings and then make adjustments on a port-by-port basis.
Note: Changes in this row are copied to all the ports as soon as you make them.
If this check box is selected for a port, the Switch discards incoming frames for VLANs
that do not include this port in its member set.
Clear this check box to disable ingress filtering.
A PVID (Port VLAN ID) is a tag that adds to incoming untagged frames received on a
port so that the frames are forwarded to the VLAN group that the tag defines.
Enter a number between 1 and 4094 as the port VLAN ID.
Select this check box to allow GVRP on this port.
GS3700/XGS3700 Series User's Guide
88