Mvr Configuration Example - ZyXEL Communications GS3700 Series User Manual
Gbe l2+ switch
Hide thumbs
Also See for GS3700 Series:
- User manual (549 pages) ,
- Cli reference manual (361 pages) ,
- Handbook (215 pages)
Table of Contents
Advertisement
Chapter 22 Multicast
22.6.2 MVR Configuration Example
The following figure shows a network example where ports 1, 2 and 3 on the Switch belong to VLAN
1. In addition, port 7 belongs to the multicast group with VID 200 to receive multicast traffic (the
News and Movie channels) from the remote streaming media server, S. Computers A, B and C in
VLAN 1 are able to receive the traffic.
Figure 125 MVR Configuration Example
News: 224.1.4.10 ~ 224.1.4.50
Movie: 230.1.2.50 ~230.1.2.60
VLAN 1
Multicast VID 200
1
7
2
S
3
A
B
C
To configure the MVR settings on the Switch, create a multicast VLAN in the MVR screen and set
the receiver and source ports.
Figure 126 MVR Configuration Example
EXAMPLE
To set the Switch to forward the multicast group traffic to the subscribers, configure multicast group
settings in the Group Configuration screen. The following figure shows an example where two
IPv4 multicast groups (News and Movie) are configured for the multicast VLAN 200.
GS3700/XGS3700 Series User's Guide
198
Advertisement
Table of Contents
