ZyXEL Communications GS3700 Series User Manual page 136

The following table describes the labels in this screen.
Table 59 Advanced Application > Mirroring > RMirror > Connected Port
LABEL DESCRIPTION
RMirror VLAN ID Select the RMirror VLAN over which the mirrored traffic is forwarded.
Port This field displays the port number.
* Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all ports. Use this
row first to set the common settings and then make adjustments on a port-by-port
basis.
Note: Changes in this row are copied to all the ports as soon as you make them.
Connected Port When the Switch is a source device in remote port mirroring, select this option to have
the port help forward mirrored traffic to the connected port of the intermediate or
destination device in the same RMirror VLAN.
When the Switch is an intermediate device in remote port mirroring, select this option
to have the port receive mirrored traffic from the connected source or another
intermediate device or forward mirrored traffic to the connected destination or another
intermediate device in the same RMirror VLAN.
When the Switch is a destination device in remote port mirroring, select this option to
have the port receive mirrored traffic from the connected source or intermediate
device in the same RMirror VLAN.
Apply Click Apply to save your changes to the Switch's run-time memory. The Switch loses
these changes if it is turned off or loses power, so use the Save link on the top
navigation panel to save your changes to the nonvolatile memory when you are done
configuring.
Cancel Click Cancel to begin configuring this screen afresh.
VLAN This field displays the ID number of port mirroring VLAN over which the mirrored
traffic is forwarded.
Connected Port This field displays the number of port(s) that helps forward mirrored traffic to other
connected switches.
Chapter 14 Mirroring
GS3700/XGS3700 Series User's Guide
136