Partex PROMARK T-800 User Manual page 53

3
Install the ribbon cassette into the printer.
Push the cassette in until it clicks into the place.
If the ribbon cassette is loose, the ribbon may not be detected, so
be sure to press it in until it clicks.
CAUTION Do not touch the connector (metal part)
Do not hold the connection terminal (metal part) of the cassette. Doing so could cause
an improper recognition of the cassette.
4
Install the plate attachment into the prin-
ter.
Align the tabs on the plate attachment with the ho-
les in the printer, and then push the plate attach-
ment in until it clicks into the place.
5
Remove the wraparound tape guide.
page 18.
6
Close the cover.
Close the cover completely so that it clicks shut.
PART 2
Basic Operations
49 49