Partex PROMARK T-800 User Manual page 104

ex. Print the following character data with 50 mm specified as the segment length, "Normal" for the
plate printing area, "Left" for character alignment, and 5 mm as the margin.
Data
Character size: 3 mm (100%)
Spaces between characters:
Wide/1.0 mm
P u m p R o o m
1
Press [Seg Len].
The segment length selection display appears.
When the specified segment length is shorter than 8.5 mm, the
printer specifications change depending on the media type. Re-
fer to "List of Function (page 152)
2
Press [ ] or [
input "50" (the segment length).
If you accidentally input an incorrect number, press [Back Space]
to delete the number and then input the correct one.
To change the segment length of all pages after entering cha-
racters, press [
Some segment length cannot be specified depending on the
character size.
3
Press [Enter].
The Plate Printing Area selection display appears.
4
Press [ ] or [
press [Enter].
The character alignment selection display appears.
5
Press [ ] or [
"5" (the margin).
If you accidentally input an incorrect number, press [Back Space]
to delete the number and then input the correct one.
If "Normal" is selected on the Plate Printing Area selection display,
you can specify the left-justification margin between 2 mm and
5 mm.
If you select "Expansion," you cannot specify the left-justification
margin. It is fixed at 0 mm.
If "Expansion" is selected on the Plate Printing Area selection di-
splay, only plates can be used as the printing media.
Press [Enter].
The display returns to the character input display.
100
] to select "Specify", and then
] or [ ] to select "All".
] to select "Standard", and then
] to select "Left", and then input
Final result
Margin: 5 mm
Text adjustment: to the left
Pump Room
Profile length: 50mm
Confirm that "Page" is selected.
segment length range that can be
specified
PP