Partex PROMARK T-800 User Manual page 80

4
Press [ ] or [
[Enter].
After the display shown at right is displayed, the character input
display re-appears. This indicates that the character data from
page 1 has been copied.
5
Press [Edit].
The Page Edit display appears.
6
Press [ ] or [
[Enter].
The system asks where you want to paste the copied data.
7
Specify the destination where you want to paste
the copied data.
8
Press [Enter].
After the display shown at right is displayed, the character input
display re-appears. This indicates that the character data from
page 1 has now been pasted after page 2.
Displaying the current page number
If you want to know the page number of the currently displayed character data, press [Page]. Press any
key to return to the character input display.
76
] to select "Yes" and then press
] to select "Paste" and then press
This indicates that there are a total of three
pages, and the currently selected page is
Press [ ] or [
and press [
position (before or after the page)
where you want to paste the data.
page 2.
] to select the page,
] or [ ] to select the