Printing Example; Winsign: Start - Partex MK10 Quick Start Manual

3. Printing example

3.1 Winsign: Start

Start WinSign on your computer
Choose the yellow flash to create a Direct marking.
System:
Choose MK10
Product group:
Here you can choose what type of
markers you want to print out.
- Heat Shrink
- Cable Markers
- Wire Markers
- Inlay Tags
- Terminal Blocks
- Component markers
- Selfadhesive Labels
Product:
Look at the label on the Partex
reel. Choose the same profile
under the choice Product
Name/Number:
Give your work file a name or num-
ber so that you can find it again if you want to print it again or change something in it.
Optional:
- Vertical print-out enables the text to be printed vertical. Perfect for example terminal
block markers.
- Check the box for Automatic marker length if you want the printer to cut directly after
the last character on each marker. You will then get different marker lengths, but you
will save profile.
Click on the OK-button to continue and to create your group marking.
2009-11-27
QUICK START MK10
PARTEX MARKING SYSTEMS 6