Lcd Screen - Partex PROMARK T-800 User Manual

LCD screen

Caps Lock
Indicates whether the Caps Lock mode is active.
: Active, so all alphabetic characters are entered
in uppercase.
(no indication): Normal(inactive)
Insert/Overwrite mode indicator
Indicates which of the two input modes is selected:
insert mode or overwrite mode.
: Insert mode
(no indication): Overwrite mode
Printing speed indicator
Indicates which printing speed has been selected:
high, middle, or low.
H : High
M : Middle
L : Low
Half cutting mode indicator
Indicates the half cutting mode that was selected for
a single printing operation in which multiple tube seg-
ments or label tape are printed and then cut apart.
Note that the half cutting mode is selected by pres-
sing [Set Cut]
: Half cut.
20
: Not half cut, but a solid line is printed showing
where to cut with scissors, etc.
: Not half cut, but a dotted line is printed sho-
wing where to cut with scissors, etc.
(No indication): Not half cut, and no cutting line
is printed.
Power indicator
Indicates that the AC adapter is properly connected.
:AC adapter
Tube Feeder
Indicates that the optional Tube Feeder has been in-
stalled.
Seg Length/Alignment/margin indicator
Indicates either "Seg Length", the length of one tube
segment(or one label); "Alignment", whether text is
centered or left-justified; or "margin".
Next page indicator
Indicates that another page exists following the cur-
rently displayed page.