Printing Style Of ｢Rpt｣ & ｢Seq - Partex ProMark MK9 Quick Start Manual

PRINTING STYLE OF ｢RPT｣ & ｢SEQ｣
The printing style for the "REPEAT and SEQUENCE" can be selected.
The default value of the "PRINTING STYLE" is "A : 11, 22, 33" at our factory.
When you use the "REPEAT and SEQUENCE" function at the same time, you
can select the printing style from "A : 11, 22, 33" or. "B : 123, 123."
Ex.) REPEAT :2 pcs.
(A : １１，２２，３３)
Printed result
(B : １２３，１２３)
Printed result
(Operation)
1. Select the "PRINTING STYLE OF ｢RPT｣ & ｢SEQ｣" in the "OPTION" menu.
2. Press to select the printing style.
▲/▼
Note：If you press the DELETE key, the selection is initialized to the factory
default.
3. Press ENTER key to register the new selection
Quick Start
SEQUENCE : 01～03
01 01
( 2 pcs. )
01 02
( 2 pcs.)
［ Ｐ Ｒ Ｉ Ｎ Ｔ Ｉ Ｎ Ｇ Ｓ Ｔ Ｙ Ｌ Ｅ
Ｏ Ｆ 「 Ｒ Ｐ Ｔ 」 ＆ 「 Ｓ Ｅ Ｑ 」 ］
Ａ ： １ １ ， ２ ２ ， ３ ３
Ｂ ： １ ２ ３ ， １ ２ ３
Doc:
Sidan/ Page:
02 02
03 01
MK9-M-04-02
28
03 03
02 03