Table of Contents
Advertisement
4
Press [
] four times; "Right 1.0mm" is displayed.
Pressing [
] increases the value in steps of 0.25mm.
Press [
] to move the printing start position to the left.
The printing start position can be adjusted up to 2.5 mm to the
left or right.
5
Press [Enter].
The display returns to the character input display. The printing
start position has now been shifted 1mm to the right. Next, move
the vertical position down 0.5mm.
6
Press [Adjust].
The Print Media selection display appears.
7
Press [
] or [
[Enter].
The Adjustments screen appears.
The vertical position can also be set separately for each print me-
dia.
8
Press [
] or [
then press [Enter].
The print media size selection screen appears.
9
Press [
] or [
[Enter].
This selects the print media size for which the adjustment is to be
made. When [Enter] is pressed, the vertical adjustment selection di-
splay appears.
When the print media is 4mm I.D. strip or wrap around tape, size
selection is skipped.
10
Press [
] two times; "Down 0.5mm" is displayed.
Pressing [
] increases the value in steps of 0.25mm.
Press [
] to move the vertical position up.
Height can be adjusted up to 0.5 mm upwards or downwards.
11
Press [Enter].
The display returns to the character input display. The vertical posi-
tion has now been shifted down by 0.5mm.
] to select "Label", and then press
] to select "Vertical adjust", and
] to select "12mm", and then press
Advanced Operations
Confirm that the printing start posi-
tion is now "Right 1.0mm".
Indicates that the vertical position is
at the standard setting (with no ad-
justment).
Confirm that the vertical position is
now "Down 0.5mm".
PART 4
109
109
Hide quick links:
Advertisement
Table of Contents
