Use The Pc Connection Kit - Partex PROMARK T-800 User Manual

1.3 Use the PC Connection Kit

Install the printer diver and application in the PC in advance.
For details on how to use the PC connection kit, refer to "Application Software for M-1 ProIV"
and the printer driver contained in the included Software CDROM.
To use the PC connection kit, connect the printer to the PC as shown.
1
Connect the printer to the PC using the included USB
cable.
Insert the type-B (square) plug of the USB cable in the USB socket
on the printer, and insert the other plug of the USB cable in the
USB socket on the PC.
* You may have to adjust the segment length for each printing
media. For more details, refer to Note, "Adjusting the segment
length" ( page 101).
26