Various Printing Functions; Printing Count And Printing Range - Partex PROMARK T-800 User Manual

4.4 Various Printing Functions

Printing count and printing range

For the sake of example, assume that the following character data for printing three tube segments has been input.
(page 1)
If "3" is set as the sets to print, tube segments are printed as shown below. In short, the three pages of character data
are printed three times, resulting in a total of nine tube segments.
First set
Second set
Third set
If "2" is set as the sets to print and "Start page: 2" and "End page: 3", tube segments are printed as shown below.
Page 2
dane
Pump Room
The sets to print can be set to any value from "1" to "10"; the print range can be selected from among "All", "Cur-
sor", and "Specified".
All
The character data from all pages is printed.
Cursor
The character data from the page where the cursor is located is printed.
Specified
Only pages in the range specified by "Start page" and "End page" are printed. For example, to print only pages 5
through 12, set "Start page: 5" and "End page: 12".
94
Pump Room
(page 2) (page 3)
Page 3
dane
First set
...For printing three markers....
...three pages with data are created....
Pump Room
Pump Room
Pump Room
Pump Room
Second set