Printing With Short Pitch Width - Partex PROMARK T-800 User Manual

Printing with short pitch width

By selecting „Expansion" on the Plate Printing Area selection display and selecting character size and number of lines
accordingly, the printable number of characters within the short pitch will increase.
If "Expansion" is selected on the Plate Printing Area selection display, only plates can be used as the printing media.
Printing on a plate for a narrow width terminal block.
ex. Create the following plate for 5mm wide terminal block. Print the following 5 characters on a
plate in 5mm width.
1
Press [Char size].
Press [ ] or [ ] to select [2mm 50%].
2
Press [Set Lines].
Press [ ] or [ ] to select [2 lines].
3
Press [Seg Len].
Press [ ] or [ ] to select [2 lines].
Press [ 5 ] and then input "5"mm as the segment length.
Press [Enter].
Plate Printing Area
Press [ ] or [ ] to select [Expansion].
Press [Enter].
The message appears.
Press [Enter].
Alignment
Press [ ] or [ ] to select [Centered].
Press [Enter].
All line centering
Press [ ] or [ ] to select [On].
Press [Enter].
Advanced Operations
segment length range that can be
specified
If "Expansion" is selected on the Pla-
te Printing Area selection display, only
plates can be selected as the prin-
ting media.
Alignment
Centered
Left
PART 4
111 111