Message List - Partex PROMARK T-800 User Manual

6.2 Message List

MESSAGE
Cannot modify.
Input value out of range.
In Vert/Hor char, Character Space
setting not possible.
No data to paste.
Not enough memory.
Character input is no longer possible.
Length exceeded.
Input data exceeds set length.
Numbering already set for this page.
Char limit exceed.
Exceeded maximum Number of characters
xxxxxx already exists.
Change the folder name
Not enough memory.
Cannot save any more files.
No files.
No files in selected folder.
Already 50 files in selected folder.
Symbol can not be input with 1.3mm font.
No character data.
No media.
DESCRIPTION
An attempt was made to select an unavailable
setting.
An attempt was made to input a value that is
outside of the settable range.
An attempt was made to select the character
spacing when the printing orientation is set as
"Vert/Hor char".
The paste operation was attempted while there
was no page data to be pasted.
An attempt was made to input characters when
there was insufficient free space in memory.
An attempt was made to input a value that is
outside of the settable range.
An attempt was made to set the numbering
function a second time on a page in which
numbering was already set.
An attempt was made to input characters in
excess of the number of characters that can
be input.
An attempt was made to specify a folder name
that already exists.
An attempt was made to save a file while there
was insufficient free space remaining.
An attempt was made to load or delete a file
even though no files have been saved.
An attempt was made to load or delete a file in
a folder even though no files have been saved
in that folder.
An attempt was made to save more than 50
files in a single folder.
Symbols cannot be entered when the character
size is set to 1.3 mm.
An attempt was made to print even though no
character data exists.
An attempt was made to print while no printing
media has been loaded.
Appendices
ACTION
Check the User's Guide and make the correct
setting.
Check the User's Guide and make the correct
setting.
The character spacing cannot be selected when
the printing orientation is set as "Vert/Hor char".
Prepare data to be pasted by cutting or copying
a page.
Delete some input data to free up some space.
Check the User's Manual and make the correct
setting.
The numbering setting can only be made once
per page.
Input only the allowed number of characters.
Specify a different folder name.
Delete any unnecessary files to create free space.
Confirm the file save destination folder. Save the
file once more.
Either delete any unnecessary files and then save
the desired files in that folder, or else save the files
in a different folder.
Change the character size to a value other than
1.3 mm.
Input character data before printing.
Load the print media and then press [Enter] to
begin printing.
PART 6
147 147