Turn the power switch on
Prep 2
Before turning the power switch on, make sure that the cassettes have been inserted properly, that the
cover is closed, and that the AC adapter is connected.
1
Press the I/0 side of the power switch.
The startup display appears.
Character input display appears after displaying the ribbon
cassette information.
The character input display appears immediately if no ribbon
cassette is installed.
*
If the display remains blank, refer to "Troubleshooting"
page 149
Do not turn the power switch on and off rapidly
CAUTION
Turning the power switch on and off rapidly and repeatedly can cause misoperation and the loss of
stored data.
Basic Operations
Startup display
Ribbon cassette information display
PART 2
39
39