Partex PROMARK T-800 User Manual page 58

15
Input "C-2".
16
Press [Set Cut].
The Set cut selection display appears.
17
Press [ ] or [
[Enter].
The Half cut selection display appears.
18
Press [ ] or [
ter].
The Cut line selection display appears.
19
Press [ ] or [
[Enter].
Now the cut line is printed as a dotted line.
The media cannot be cut in the plate mode.
20
Press [Func].
The Function selection display appears.
21
Press [ ] or [
press [Enter].
The Center line selection display appears.
22
Press [ ] or [
ter].
The character input display reappears.
54
] to select "Half cut" and then press
] to select "Off" and then press [En-
] to select "Dotted" - and then press
] to select "CenterLine" and then
] to select "On" and then press [En-
C– 1
C– 2
Set Cut
Half cut
Full cut
Half cut
Off
On
Cut Line
None
Line
Dotted
C– 1
C– 2
Settings
Density adjustment
Tube print speed
Underline 6 and 9
CenterLine
Off
On