Partex PROMARK T-800 User Manual page 29

Do not handle the power cord with wet hands
Do not plug in or unplug the AC adapter while your hands are wet. Doing so could result in electric
shock.
Do not connect to a multi-outlet adapter or extension cord
Do not connect this unit to a multi-outlet adapter or extension cord. Doing so could result in fire or
electric shock. Do not power on with the power cord tied. It can cause fire or electrical shock.
Push the plug in all the way
Push the AC adapter power plug all of the way into the power outlet. Failure to do so could result in
fire or electric shock.
Do not use any AC adapter or cord other than the included one
Never use any other AC adaptor or cord than the included one. Using it can result in fire, electric
shock, or printer failure. Do not use the included AC adapter for any other product. Fire or electric
shock can result.
Use a 100-240V AC power supply
Use at voltage between 100 and 240V AC. If not, it may result in fire, electrical shock or machine failure.
When it thunders at a short distance, remove the power plug from the outlet
When it thunders at a short distance, remove the power plug from the outlet. If not, it may result in fire,
electric shock, or machine failure.
Do not damage the AC adapter and cord
Do not damage, pull excessively, or modify the AC adapter and cord. Do not place a heavy thing on
the AC adapter and cord. A short-circuit can be caused at the damaged portion, resulting in a fire
or electric shock.
Handle the AC adapter carefully
When unplugging the power cord from an outlet, grasp the plug itself; do not pull on the cord. Pulling
on the cord could damage it, which could result in injury, fire or electric shock.
Keep the area around the AC adapter clear
In order to allow you to unplug the AC adapter quickly in an emergency, do not place other objects
around the outlet. An inability to unplug the unit quickly in an emergency could result in fire or electric
shock.
About the memory backup battery
Note
If the memory backup battery starts become weak, the mes-
sage shown below is displayed when the printer is turned on. If
you continue to use the printer without replacing the battery, the
memory backup battery will become completely dead, and the
next time that the printer is turned off all data and settings will
be lost. If this message appears, be sure to contact your dealer.
If the memory backup battery becomes completely dead, the
CAUTION
message shown below is displayed when the printer is turned
on. If this message appears, be sure to contact your dealer. If
you continue to use the printer without replacing the battery, the
printer may operate incorrectly.
Before You Begin
Memory backup
battery low
Contact dealer.
After reading this message, press
any key to continue.
Memory backup
battery exhausted.
Resetting memory.
PART 1
25 25