Partex PROMARK T-800 User Manual page 100

5
Press [ ] or [
6
Press [ ] or [
7
Press [ ] or [ ] to select "Start page", and then
press [2].
8
Press [ ] or [ ] to select "End page", and then
press [4].
9
Press [Enter].
Printing begins.
Canceling printing
If you press [Canc], the message "Aborting print." appears and
printing is aborted. In this case, the tube that is currently being
printed is cut and then ejected.
If a tube jams
Hold down [Canc] until the printer beeps. The printer stops all
operations immediately. In this case, the tube is not cut and it is
not ejected. Refer to "If a Tube or Label tape Becomes Jammed"
page 124 and take out the jammed tube.
96
] to select "Range"
] and then select "Specified"