Partex PROMARK T-800 User Manual page 110

3
Press [
press [Enter].
The decimal numbering setting display appears.
In addition to decimal numbering, you can also specify hexadeci-
mal or alphabetical numbering. For details, refer to Memo on the
next page, "Various types of numbered printing".
If you accidentally input an incorrect number, press [Back Space]
to delete the number and then input the correct one.
4
Press [ ] or [
input "1".
The display for specifying the start value and end value appears.
Numbering in descending order
For example, if you enter "10" as the start value and "5" as the
end value, you can set up numbering in descending order (10,
9, 8, 7, 6, 5).
5
Press [ ] or [
input "10".
6
Press [Enter].
The Padding character setting display appears.
For details on "Padding character", refer to Memo, "Padding cha-
racter" on the next page.
7
Press [ ] or [
[Enter].
The number portion has now been input.
Numbering can only be set in one location per page. To cancel
numbering, simply use the [Back Space] key to delete the number
portion.
8
Perform the printing operation.
Even though only one page with character data has been cre-
ated, character data from "Pump Room 1" to "Pump Room 10"
is printed.
Numbering print can be used together with continuous print.
ex. Continuous print set to 2 and numbering print set for decimal values from 1 to 8.
106
] or [ ] to select "Decimal", and then
] to select "Start value", and then
] to select "End value", and then
] to select "None", and then press
Range of numbers that can be
entered.
Pump Room
The number portion
is displayed with a