From Cassettes; Install Cassettes - Partex PROMARK T-800 User Manual

2.2 Printing on Label Tape, Heat Shrink Tube, and 4mm I.D. Strip
Print the text by the following operating procedure. Prepare the following according to the type of media to be printed
• To print on label tape: label tape cassette
• To print on heat shrink tube: heat shrink tube cassette
• To print on 4mm I.D. strips: 4mm I.D. strip cassette
These cassettes are not include with the machine: they must be purchased separately. Contact your dealer for details.
Installing cassettes
Prep 1
Turn the power switch on
Prep 2
Input characters
Step 1
Print
Step 2

Install cassettes

Prep 1
Install the ribbon cassette and the label tape cassette. Note that this explanation assumes that you
will be printing on label tape. If you will be printing on heat shrink tube or 4mm I.D. strip, simply sub-
stitute heat shrink tube cassette or 4mm I.D. strip cassette for label tape cassette as appropriate.
1
Open the cover.
Push the cover handle to the left and open the cover.
2
Take up any slack in the ribbon.
Remove the stopper and then take up any slack in the ribbon.
The printer cannot detect the ribbon if it has any slack in the rib-
bon. Always be sure to take up slack in the ribbon when installing
a cassette.
Dispose the removed stopper according to local government re-
gulation.
36