Partex PROMARK T-800 User Manual page 10

Cable i.d. printer
Hide thumbs Also See for PROMARK T-800:
Table of Contents

Advertisement

Always keep the AC plug clean
Clean the AC adapter plug periodically. If dust, dirt, soot, etc., is allowed to accu-
mulate on the plug, the dust could absorb moisture, creating an insulation fault
that could cause a fire.
Do not continue to use the unit if an abnormality develops
If the unit begins to smoke or emit an unusual odor, turn the power switch off im-
mediately, unplug the AC adapter plug from the power outlet, and then contact
your nearest dealer. Continuing to use the unit after an abnormal condition has
developed could result in fire or electric shock.
Do not connect to a multi-outlet adapter or extension cord
Do not connect this unit to a multi-outlet adapter or extension cord.
Doing so could result in fire or electric shock.
Do not power on with the power cord tied. It can cause fire or electrical shock.
Do not use sprays, etc., in the vicinity of the unit
Do not use flammable sprays in the vicinity of this unit. The spray could come into
contact with internal components of the unit, resulting in a fire or electric shock.
Do not clean with paint thinner, etc.
If it is necessary to wipe dirt off the unit, use gauze that has been dampened
with water and then thoroughly wrung out. Never use flammable solvents such
as alcohol, benzene or paint thinner. The solvents could come into contact with
internal electric components and cause a fire or electric shock.
Turn the unit off for cleaning
Before cleaning the unit, turn the power off and unplug the AC adapter from the
power outlet. Injury could result if the power switch is inadvertently left in the "ON"
position and the unit is put into operation.
6

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents