Changing The Type Of Ring; Adjusting The Ring Volume; Hiding The Message Or Calls Indication - Nortel Modular ICS 4.0 Manual

Move line to:
QUIT
Press a line

Changing the type of ring

You can choose one of four distinctive rings for your
telephone. This makes it easier to identify your telephone in an
ĥfl
open office.
⁄
1. Press
2. Press
ring for two seconds.
˙
3. Repeat until you hear the ring you prefer, then press

Adjusting the Ring volume

ƒ•°‚
√
1. Press
2. Press
and right end for higher.

Hiding the message or calls indication

The display that shows you have messages or calls can be
replaced with the current time and date. You can retrieve your
message and call information by using the display buttons that
appear on the second line of the display.
P0881591 Issue 01
Press the button you want to move the line
to. Neither of the buttons is erased. The
lines, or the line and feature, simply switch
places.
The button you are trying to move is not a
line button. If you are trying to switch a line
and a feature, move the line to the feature
button and not the feature button to the line.
¤ ‹ ›
.
, , , , or NEXT. You hear the selected
or OK.
to adjust the volume; left end for lower
Customizing your telephone / 125
ĥfl
ƒ•°‚
. The telephone rings.
ƒ°‚fl
Modular ICS 4.0 System Coordinator Guide