Table of Contents
Advertisement
3.2.2 Main/Aux Output Switching
Only the DS-7200HQHI-F/N, DS-7200HUHI-F/N, DS-7300HQHI-F/N and DS-8100HQHI-F/N series
support Aux/Main output switch.
When the HDMI/VGA output is configured as the main output, you can perform the following operation to
switch to CVBS output as the main output.
Steps:
1. Use the mouse wheel to double-click on the HDMI/VGA output screen, and the following message box pops
up:
2. Use the mouse wheel to double-click on the screen again to switch to the Aux output, or click Cancel to
cancel the operation.
3. Select the Menu Output Mode to Main CVBS from the right-click menu on the monitor.
4. On the pop-up message box, click Yes to restart the device to enable the CVBS output as the main output.
You can select the Menu Output Mode under Menu>Configuration>General>More Settings to Auto, or
HDMI/VGA and then restart the device to switch the main output back to HDMI/VGA output.
3.2.3 Quick Setting Toolbar in Live View Mode
On the screen of each channel, there is a quick setting toolbar which shows when you click the screen.
You can refer to Table 3.4 for the description of Quick Setting Toolbar icons.
Digital Video Recorder User Manual
Figure 3. 1 Right-click Menu
Figure 3. 2 Switch Main and Aux Output
Figure 3. 3 Quick Setting Toolbar
48
Advertisement
Table of Contents
