Configuring Pppoe Settings; Configuring Ntp Server - HIKVISION DS-7IOOHGHI-SH Series User Manual

User Manual of Digital Video Recorder
Password: Enter the password of the device. By default it is 12345.
5. Click the Apply button to save and exit the interface.

9.2.2 Configuring PPPoE Settings

Purpose:
The DVR also allows access by Point-to-Point Protocol over Ethernet (PPPoE).
Steps:
1. Enter the Network Settings interface.
Menu > Configuration > Network
2. Select the PPPoE tab to enter the PPPoE Settings interface.
3. Check the PPPoE checkbox to enable this feature.
4. Enter User Name and Password for PPPoE access.
The User Name and Password should be assigned by your ISP.
5. Click the Apply button to save the settings.
6. After successful settings, the system asks you to reboot the device to enable the new settings, and the
PPPoE dial-up is automatically connected after reboot.
You can go to Menu > Maintenance > System Info > Network interface to view the status of PPPoE
connection.

9.2.3 Configuring NTP Server

Purpose:
A Network Time Protocol (NTP) Server can be configured on your DVR to ensure the accuracy of system
Figure 9. 11 Access Device via iVMS4200
Figure 9. 12 PPPoE Settings Interface
143