Alarm Recording - HIKVISION DS-9516NI-S-1TB User Manual

9.3.4 Alarm Recording

Select
Step1: Select alarm input.
Note:
It refers to the alarm input of IP channel.
Step2: Select the type of alarm input, "NO" or "NC".
Note:
"NO" is the default status. The settings will become
effective after rebooting.
If you are using IP camera that is not from Hikvision, please
setup this function by using its own software.
Step3: Enable "Alarm Handle" to activate "Arm Schedule" &
"Linkage Method".

43