Multiboot Menu - IBM E10 Service Manual

System Management Services Connection
Device
PowerPC 604e 332MHz
L2-Cache, 0256K
PowerPC 604e 332MHz
L2-Cache, 0256K
PowerPC 604e 332MHz
L2-Cache, 0256K
PowerPC 604e 332MHz
L2-Cache, 0256K
Memory
Memory Card Slot 1, module slot=1 size=128MB
Memory Card Slot 1, module slot=1 size=128MB
Service Processor
LPT
addr=378B
COM
*-----------* *-----------*
³P=prev-page³ ³N=next-page³
*-----------* *-----------*

MultiBoot Menu

Multiboot Menu
1. Select Software
2. Software Default
3. Install From
4. Select Boot Devices
5. OK Prompt
6. Mulitboot Startup <OFF> (or <ON>)
===>
The Select Software option shows the name of the operating system installed.
If you receive a message saying that:
No Operating System Installed
this would mean that information in non-volatile storage could have been lost, as would happen if the I/O
planar battery had failed.
The Software Default option, if not used.
The Install From option produces a list of devices, for example the CD-ROM, where the operating system
may be installed from.
The Select Boot Device option provides options to display or change the boot device order. The proper
order is,
236
VOLUME 3, ESS Service Guide
*------*
³X=Exit³
*------*
*------*
³X=Exit³
*------*