Failing Function Codes - IBM E10 Service Manual

Table 12. Service Request Numbers (continued)
Service SRN
Request Src.
Number
887-125 G
887-202 D
887-203 D
887-209 D
887-304 D
887-305 D
887-306 D
887-307 D
887-319 D
887-400 D
887-401 D
887-402 D
887-403 D
887-404 D
887-405 F
935-101 to D
935-102
935-103 to D
935-107
935-108 D
935-109 to D
935-110
935-111 to D
935-114
935-115 to D
935-121
935-122 G
935-123 G
935-124 D
9CC-1XX G
9CC-XXX G

Failing Function Codes

Failing function codes represent functions within a cluster.
Failing Description and Action
Function
Codes
887 Description: Fuse test failed.
887 Description: Vital product data test failed.
887 Description: Vital product data test failed.
887 Description: RJ-45 converter test failed.
887 Description: Coprocessor internal test failed.
887 Description: Internal loopback test failed.
887 Description: Internal loopback test failed.
887 Description: External loopback test failed.
887 software Description: Device driver indicates a hardware failure.
887 Description: Fuse test failed.
887 Description: Circuit breaker for Ethernet test failed.
B09 887 Description: Ethernet 10 Base-2 transceiver test failed.
B08 887 Description: Ethernet 10 Base-T transceiver test failed.
C29 887 Description: RJ-45 converter test failed.
Ethernet Description: Rerun diagnostics in advanced mode for accurate problem
network 887 determination.
935 828 Description: The diskette-drive select or deselect test failed.
935 828 Description: The diskette failed.
935 Description: The diskette read test failed.
935 828 Description: The read/write on the diskette drive failed.
935 Description: A diskette drive test failed.
935 828 Description: The diskette drive test failed.
935 828 Description: The error log analysis indicates a hardware failure.
935 Description: The error log analysis indicates a hardware failure.
935 software Description: Unable to configure the device.
Description: I/O error on PCI bus.
Action: See "Bus SRN to FRU Reference Table" on page 99.
Note: XX represents the last two digits of the SRN.
xxx 2C9 Description: I/O bus data, address parity error, or time-out error.
Note: XX represents the last three digits of the SRN.
Error Messages, Diagnostic Codes, and Service Reports, CHAPTER 9
Codes
131