IBM E10 Service Manual page 133

Table 12. Service Request Numbers (continued)
Service SRN
Request Src.
Number
651-160 D
651-161 D
651-162
651-170 D
651-171 D
651-600 G
651-601 G
651-603 G
651-605 G
651-608 G
651-609 G
651-610 G
651-611 G
651-612 G
651-613 G
651-614 G
651-615 G
651-619 G
651-621 and G
651-623
651-624 G
651-625 G
651-626 G
651-627 G
651-628 G
Failing Description and Action
Function
Codes
2E0 Description: I/O planar sensor indicates a fan is turning too slowly.
Note: Go to "MAP 4740: Fan Check Detected by I/O Planar" in chapter 3
of the Enterprise Storage Server Service Guide, Volume 1.
152 2E2 Description: Sensor indicates a voltage is outside the normal range.
Description: See SRN 651-152
Description: Sensor status not available.
Action: Contact your next level of support.
Description: Sensor status not available
Action: Contact your next level of support.
Description: Uncorrectable memory or unsupported memory.
Action: Examine the memory modules and determine if they are supported
types. If the modules are supported, then replace the appropriate memory
module(s).
Description: Missing or bad memory
Action: If the installed memory matches the reported memory size, then
replace the memory: otherwise, add the missing memory.
2C6 2C7 Description: Bad or missing memory
2C6 Description: Failed memory module
Action: The most probable failure is the memory module paired with the
memory module identified by the location code.
D01 Description: Bad L2 Cache
D01 Description: Missing L2 Cache
210 Description: CPU internal error
210 Description: CPU internal cache error
D01 Description: L2 Cache parity or multi-bit ECC error
D01 Description: L2 cache ECC single-bit error
214 Description: Time-out error waiting for memory controller
292 Description: Time-out error waiting for I/O
Description: Problem log analysis indicates an error detected by the CPU.
The error log indicates the following physical FRU location(s) as the
probable cause(s).
Action: Use the physical location codes to replace the FRUs that are
identified on the problem detail screen.
2C6 Description: Correctable error threshold exceeded
214 Description: Memory controller internal error
214 Description: Memory Address (Bad address going to memory)
214 Description: Memory Data error (Bad data going to memory)
214 Description: Memory time-out error
210 Description: Processor time-out error
Error Messages, Diagnostic Codes, and Service Reports, CHAPTER 9
Codes
117