Table of Contents
Advertisement
2105 Exception Symptom Codes
An Exception Symptom Codes (ESC) is a two byte code that indicates what functional area of the 2105
has failed. The ESC is generated by the internal error handling code of the 2105.
Platform Exception Symptom Codes
The following Platform ESC code values are set during analysis. The allocated ESC range for detected
errors is '1000'x to '1FFF'x.
Table 15. 2105 Platform Exception Symptom Codes (ESC)
ESC
Description of ESC
1000
Error attempting to access ODM
1001
Reached threshold on IML attempts
1002
Failure issuing ioctl to cpssdd
1003
Failure in running configuration manager
1004
cpss0 is not available
1005
Error configuring cpssdd into kernel
1006
Hidden memory not mapped, possible code load problem
1007
Licensed Internal Code feature file did not decrypt or validate
Automatic Diagnostic Exception Symptom Codes
The following Automatic Diagnostic ESC code values are set during analysis. The allocated ESC range for
detected errors is '1100'x to '13FF'x.
Many times the 1xxx ESC and SRN have the same meaning, sometimes they do not. When the value of
the SRN and ESC are the same, the definition of both is found below. For additional information, see
"Service Request Numbers (SRN)" on page 173.
Table 16. 2105 Exception Symptom Codes (ESC)
ESC
Description of ESC
1100
Cross Platform Interconnect (CPI) failure
1201
Resource missing or failing
1201
(SRN=60000) SSA device card unable to configure
1202
Unexpected resource
1203
Resource in wrong location
1204
SSA link failure
1205
SSA bypass card failure
1206
FRU failure
1207
One DDM detected redundant power loss
1208
Wrong number of DDMs in drawer
1209
Unexpected result
120A
SSA device card failure
120B
Modem communication failure
120C
DDM capacity incompatibility and/or array offline
120D
Multiple failure analysis needed
120E
SSA device drawers not cabled correctly
Error Messages, Diagnostic Codes, and Service Reports, CHAPTER 9
2105 Exception Symptom Codes
141
Advertisement
Table of Contents
