Service Processor Connection
Serial Port Selection Menu:
Serial Port Selection Menu
1. Serial Port 1 Call-Out:
Currently Disabled
2. Serial Port 2 Call-Out:
Currently Disabled
3. Serial Port 1 Call-In:
Currently Disabled
4. Serial Port 2 Call-In:
Currently Disabled
98. Return to Previous Menu
You may enable and/or disable the call-in and call-out functions of each serial port in any combination.
Serial Port Speed Setup Menu:
Serial Port Speed Setup Menu
1. Serial Port 1 Speed:
Currently 9600
2. Serial Port 2 Speed:
Currently 9600
98. Return to Previous Menu
Serial port speed can be set for terminal performance or to accommodate modem capabilities. A speed of
9600 baud or higher is recommended. Valid serial port speeds are shown below:
50
75
110
134
150
300
Telephone Number Setup Menu: This menu may be used to set or change the telephone numbers for
reporting a system failure. The SP allows setting or changing telephone numbers for:
v Service Center Telephone Number: - The telephone number of the maintenance provider's computer.
v Customer Administration Center Telephone Number: - The telephone number of the local system
support provider's computer.
v Digital Pager Telephone Number: The number for a pager carried by someone who will respond to
problem calls from your server.
v Customer Voice Telephone Number: - The telephone number service support representative will use to
reach the system user.
v Customer System Telephone Number: - The telephone number to which the server's modem is
connected.
222
VOLUME 3, ESS Service Guide
600
1200
1800
2000
2400
3600
4800
7200
9600
19200
38000
57600
115200