IBM E10 Service Manual page 142

Codes
Table 12. Service Request Numbers (continued)
Service SRN
Request Src.
Number
821-221 D
821-230 D
821-240 G
821-241 G
821-310 to D
821-331
821-332 D
821-333 to D
821-334
823-121 to D
823-122
823-130 D
823-132 to D
823-133
823-134 D
823-140 G
823-142 D
824-331 D
824-332 D
824-333 D
824-441 D
824-442 D
824-450 D
824-461 G
824-511 D
824-512 D
824-523 D
824-524 D
826-111 D
826-112 D
826-113 D
826-114 D
826-121 D
826-122 D
826-123 D
826-131 D
126
VOLUME 3, ESS Service Guide
Failing Description and Action
Function
Codes
821 Description: The Key-Planar adapter test failed.
221 Description: Software error caused by hardware failure.
821 Description: The error log analysis indicates hardware failure.
221 Description: The error log analysis indicates hardware failure.
821 Description: Standard Key-Planar Adapter failed.
821 software Description: Cannot open device.
821 Description: Key-Planar/tablet adapter failed.
823 Description: Built-In mouse adapter problems.
221 Description: Software error caused by hardware failure.
823 Description: Built-In mouse adapter problem.
823 software Description: Cannot open device.
823 Description: The error log analysis indicates hardware failure.
823 Description: Unable to place mouse adapter in block mode.
824 227 Description: An unexpected error occurred.
824 227 Description: The enable/disable device test failed.
Note: Ensure that the wrap plug was not attached when the test was run. If
the wrap plug was attached, remove it, and rerun the test.
824 Description: The internal wrap test failed.
824 Description: An unexpected error occurred.
824 Description: The wrap test failed.
227 Description: Software error caused by hardware failure.
227 Description: The error log analysis indicates a hardware failure.
824 Description: An unexpected error occurred.
824 Description: Tablet adapter reset test failed.
824 Description: Device cannot be configured.
824 software Description: Cannot open device.
221 Description: Cannot run the test because the device driver detected a
hardware error.
221 Description: Unable to determine the type of adapter from the VPD.
826 Description: The VPD verification test failed.
826 Description: The register verification test failed.
221 Description: Cannot run the test because the device driver detected a
hardware error.
221 Description: The data-wrap communications test failed.
221 Description: The modem control line test failed.
221 Description: Cannot run the test because the device driver detected a
hardware error.