Initial Setup Of Ebterm Dialing Profile For 2105 Direct Connect - IBM E10 Service Manual

c. If the Connect dialog box displays 2105 Direct Connect, the service terminal is setup to run
EBTERM in 2105 Direct Connect Mode.
Is the service terminal set up to run EBTERM in 2105 Direct Connect Mode?
v Yes, go to step 8.
v No, go to "Initial Setup of EBTERM Dialing Profile for 2105 Direct Connect".
8. Select the following service terminal option and go to the indicated page and step:
v Normal Service Activities
– Service Login Operation Connection, with Cluster IML Complete step 2 on page 57.
9. Windows Operating System: Determine if the service terminal is setup to run the NetTerm terminal
emulator in Direct Connect IBM3151 emulation mode:
Note: If the NetTerm icon is not available, you will need to download the NetTerm program from the
software Library or contact your next level of support.
a. Double click on the NetTerm icon.
b. Single click on File and then Phone Directory.
c. If the Phone Directory displays IBM 2105 VSS/ESS (Direct Connect, IBM3151 emulation), the
service terminal is setup to run NetTerm.
Is the service terminal setup to run NetTerm?
v Yes, 10.
v No, go to "Initial Setup of NetTerm for Windows" on page 56
10. Select the following service terminal option and go to the indicated page and step:
v Normal Service Activities
– Service Login Operation Connection, with Cluster IML Complete step 2 on page 57.

Initial Setup of EBTERM Dialing Profile for 2105 Direct Connect

1. If the service terminal WAS previously setup to run EBTERM in 2105 Direct Connect Mode, go to step
4 on page 56.
2. Select the EBTERM icon and double click on it.
3. From the "EBTERM Window" select and click on menu options:
Setup
Configuration/Modem
COM1, click black dot On (()
Note: This procedure assumes that the service terminals 9-pin serial connector is assigned
as COM1. If COM1 is assigned to a different connector, use that connector.
Select and click on the Enter box.
Note: Ignore all items in the EBTERM (_) Configuration/Modem window except COM1 and
the Enter button.
From the "EBTERM Window" select and click on menu options:
Setup
Dialing Profiles
Add Profile
Select and click on the next unused profile.
In the "EBTERM (_) Dialing Directory: Profile _" dialog box, enter or select:
v Host Location Description, enter 2105 Direct Connect
v Modem Initialization, delete all entries (blanks)
v Number to Dial, delete all entries (blanks)
Service Terminal Setup
Service Terminal, CHAPTER 8
55