IBM E10 Service Manual page 190

2105 Exception Symptom Codes
Table 17. 2105 Service Request Number (SRN) Descriptions (continued)
SRN Description of SRN
33XXX Excessive link configurations
40000 SSA device card failed
40004 DRAM failed (module 0) - 4 MB
40008 DRAM failed (module 0) - 8 MB
40016 DRAM failed (module 0) - 16 MB
40032 DRAM failed (module 0) - 32 MB
40064 DRAM failed (module 0) - 64 MB
40128 DRAM failed (module 0) - 128 MB
41004 DRAM failed (module 1) - 4 MB
41008 DRAM failed (module 1) - 8 MB
41016 DRAM failed (module 1) - 16 MB
41032 DRAM failed (module 1) - 32 MB
41064 DRAM failed (module 1) - 64 MB
41128 DRAM failed (module 1) - 128 MB
42000 Both DRAMs failed
43XXX Device preventing SSA configuration
44XXX DDM failed
45XXX SSA link opened
46000 > 1 member of array not available
48900 > 1 array member failed
48950 Array rebuild failed, DDM caused
49000 Array degraded, no available spare
49100 Array exposed, no available spare
49500 No spare available for array
49501 Spares + Members not= 8 x n
49502 Configuration time-out, multiple SSA errors
49503 Power sense of controller card code load fail
49700 Incomplete parity on array
4BXXX Unable to configure disk drive
50000 SSA device card failed to respond
50001 SSA device card data parity error
50002 SSA device card DMA error
50004 SSA device card channel check
50006 SSA device card channel check
50007 SSA device card IOCC detected intermittent error
50008 SSA unable to access POS/PCI cfg space
50012 SSA microcode hung, hardware?
50013 SSA device card error
50100 Attempt to log error against unavailable pdisk
504xx SSA device card, microcode hung, hardware?
174
VOLUME 3, ESS Service Guide