IBM E10 Service Manual page 139

Table 12. Service Request Numbers (continued)
Service SRN
Request Src.
Number
804-128 D
804-129 D
804-150 D
804-151 D
804-152 D
804-162 D
804-171 D
804-172 D
804-173 D
804-175 D
804-198 D
804-199 D
804-211 D
804-281 D
804-301 G
804-302 G
804-xxx H
805-600 G
805-601 G
805-602 G
805-603 G
805-604 G
805-605 G
805-606 G
805-607 G
805-608 G
Failing Description and Action
Function
Codes
804 Description: The CD-ROM drive indicates an error.
804 Description: The CD-ROM drive indicates an error.
Media 804 Description: A media error was detected.
804 B88 Description: A command time-out was detected.
804 Description: A command reservation conflict was detected.
804 Description: The CD-ROM drive indicates an error.
804 Description: Unable to reserve device.
804 Description: Unable to do configuration.
804 Description: Unable to open device driver.
804 Description: The CD-ROM drive indicates an error.
804 B88 Description: Undefined error detected.
804 Description: Undefined error detected.
804 Description: The LED test failed.
804 Description: No tone during audio test.
804 Description: Errors found during ELA.
804 B88 Description: Errors found during ELA.
Use the xxx Description: An unexpected halt occurred while running the diagnostics.
number Note: If your 804-xxx SRN is listed in this section, use the procedure for
that SRN instead of this one.
Action: Call next level of support.
Description: Problem log analysis indicates a machine check due to
uncorrectable memory error or unsupported memory.
Action: Examine the memory modules and determine if they are supported
types. If the modules are supported, then replace the appropriate memory
module(s).
210 Description: Problem log analysis indicates a machine check due to CPU
internal cache error.
214 D01 Description: Problem log analysis indicates a machine check due to CPU
address/data bus parity error.
210 214 D01 Description: Problem log analysis indicates a machine check due to CPU
bus transfer error.
210 D01 Description: Problem log analysis indicates a machine check due to CPU
address/data bus parity error.
210 Description: Problem log analysis indicates a machine check due to CPU
bus transfer error.
214 Description: Problem log analysis indicates a machine check due to
memory controller internal error.
210 214 Description: Problem log analysis indicates a machine check due to
memory address error.
214 217 Description: Problem log analysis indicates a machine check due to a
Flash ROM error.
Error Messages, Diagnostic Codes, and Service Reports, CHAPTER 9
Codes
123