Table of Contents
Advertisement
9 and 10 Character Progress Codes
Table 14. 10 Character Progress Code Table (continued)
9 and 10 Character
Description
Progress Codes
CU000–507B
CPI-5 Flash Code Update (P2–I7/JB,I/O Attachment Card)
CU000–504A
CPI-6 Flash Code Update (P2–I4/JA,I/O Attachment Card)
CU000–507A
CPI-7 Flash Code Update (P2–I7/JA,I/O Attachment Card)
CU000–6014
CPI-4 Lattice Code Update (R1–B1, Host Bay Planar)
CU000–6025
CPI-5 Lattice Code Update (R1–B2, Host Bay Planar)
CU000–6036
CPI-6 Lattice Code Update (R1–B3, Host Bay Planar)
CU000–6047
CPI-7 Lattice Code Update (R1–B4, Host Bay Planar)
CU000–7014
CPI-4 Flash Code Update (R1–B1, Host Bay Planar)
CU000–7025
CPI-5 Flash Code Update (R1–B2, Host Bay Planar)
CU000–7036
CPI-6 Flash Code Update (R1–B3, Host Bay Planar)
CU000–7047
CPI-7 Flash Code Update (R1–B4, Host Bay Planar)
SDxxxxxxx
CPI Interface Diagnostics progress codes where x is a hexadecimal character. Each CPI
interface is tested as the "Init CPIX" 9 character progress codes are displayed. Normally, if a
CPI error is detected, the cluster bay code load will complete, the CPI interface will be fenced
and a problem will be created. If the cluster bay stops with this displayed, go to "MAP 4030:
Isolating CPI Diagnostic Progress Code Stop" on page 239.
SL111-00xx
Loading DDM LIC code, xx=minutes load has been in progress.
Load of DDM LIC code stopped with an error, go to "MAP 4710: DDM LIC Update" in chapter
SL111-0E00
3 of the Enterprise Storage Server Service Guide, Volume 1.
Load of DDM LIC code timed out, go to "MAP 4710: DDM LIC Update" in chapter 3 of the
SL111-0F00
Enterprise Storage Server Service Guide, Volume 1.
SR000-0100
RAS IML Process Starting
SR000-0200
Initializing RAS Runtime Objects
SR000-0300
Starting the AIX Call Home program
SR000-0400
Initializing the Modem
SR000-0500
Running Error Log Analysis
SR000-0600
Running Cluster Bay Configuration Check
SR000-0630
Running Cluster Bay Health Check
SR000-0660
Running Configuration Error Check
SR000-0700
Calling the Trace Re-start Function
SR000-0800
Starting the WEB Server
READY
RAS IML Complete, slow-blinking Message LEDs have been reset
2105 Primary Power Supply Digital Status Display
The primary power supply (PPS) status display is normally off. If a power system fault is detected, a two
digit fault code will be displayed.
The primary power supply two digit status codes are explained, repaired, and defined in:
v "MAP 2350: PPS Status Indicator Codes" in chapter 3 of the Enterprise Storage Server Service Guide,
Volume 1
v "PPS Status Indicator Codes" table in chapter 3 of the Enterprise Storage Server Service Guide,
Volume 1
140
VOLUME 3, ESS Service Guide
Advertisement
Table of Contents
