Microcode Logic Errors; Ssa Device Card Exception Symptom Code And Service Request Numbers - IBM E10 Service Manual

2105 Exception Symptom Codes
ESC Description of ESC
8347 RPC PPS to RPC Cable Check
8350 Periodic replacement of rack battery is required
8360 Cluster bay 1 thermal sensor out of range
8361 Cluster bay 2 thermal sensor out of range
8362 Cluster bay 1 and cluster bay 2 thermal sensors out of range

Microcode Logic errors

The following describe the ESC codes that will be used when errors are encountered that require support
trained service personnel. The allocated range for support level errors is '9000'x to '9FFF'x.
ESC Description of ESC
9000-9804 Support level errors
SSA Device Card Exception Symptom Code and Service Request
Numbers
The following SSA ESC and SRN code values are set during SSA device card error analysis. The
allocated ESC range for detected errors is 'C000'x to 'C5FF'x.
Note: These SRNs may also occur with an ESC of 1xxx. See "Service Request Numbers (SRN)" on
page 173
ESC SRN
C001 xxxxx
C100 40000
C110 50000
C110 50001
C110 50002
C110 50004
C110 50006
C110 50007
C110 50008
C110 50013
C120 D4000
C120 D4100
C130 D4300
C140 D44XX
C200 40004
C200 40008
C200 40016
C200 40032
C200 40064
C200 40128
C210 41004
170
VOLUME 3, ESS Service Guide
Description of ESC and SRN
SRN not on ESC list
SSA device card failed
SSA device card failed to respond
SSA device card data parity error
SSA device card DMA error
SSA device card channel check
SSA device card channel check
SSA device card IOCC detected intermittent error
SSA unable to access POS/PCI cfg space
SSA device card hardware error
Cannot configure SSA device card
Cannot open SSA device card
SSA device card POST failure
SSA microcode corrupted, cannot update
DRAM failed (module 0) - 4 MB
DRAM failed (module 0) - 8 MB
DRAM failed (module 0) - 16 MB
DRAM failed (module 0) - 32 MB
DRAM failed (module 0) - 64 MB
DRAM failed (module 0) - 128 MB
DRAM failed (module 1) - 4 MB