Table of Contents
Advertisement
CALL-IN/CALL-OUT SETUP MENU
CALL-IN/CALL-OUT SETUP MENU
1. Modem Configuration Menu
2. Serial Port Selection Menu
3. Serial Port Speed Setup Menu
4. Telephone Number Setup Menu
5. Call-Out Policy Setup Menu
6. Customer Account Setup Menu
7. Call-Out Test
8. Ring Indicate Power-On Menu
98. Return to Previous Menu
99. Exit from Menus
v Modem Configuration Menu, see "Modem Configuration Menu".
v Serial Port Selection Menu, see "Serial Port Selection Menu" on page 222.
v Telephone Number Setup Menu, see "Telephone Number Setup Menu" on page 222.
v Call-Out Policy Setup Menu, see 7 on page 54.
v Customer Account Setup Menu, see "Customer Account Setup Menu" on page 224.
v Ring Indicate Power-On Menu, see 218.
Modem Configuration Menu: The first two lines of the Modem Configuration Menu are status lines
showing the current selections. Selections are made in the two section labeled Modem Ports and Modem
Configuration File Name. Select the serial port that you that you want to activate and then select the
modem configuration file for the modem on the port. If you wish to set up both serial ports with modems,
make your selections one port at a time.
For information on choosing a modem configuration file, see "Sample Modem Configuration Files" on
page 232 and "Seamless Transfer of a Modem Session" on page 232.
Modem Configuration Menu
Port 1 Modem Configuration File Name:
Port 2 Modem Configuration File Name:
To make changes, First select the port and then the configuration file
name
Modem Ports:
1. Serial port 1
2. Serial port 2
Modem Configuration File Name:
3. modem_f_sp
4. modem_f0_sp
5. modem_f1_sp
6. modem_z_sp
7. modem_z0_sp
8. none
9. Save configuration to NVRAM and Configure modem
98. Return to Previous Menu
Service Processor Connection
Appendix A. Service Processor Connection
221
Advertisement
Table of Contents
