A.4.2 Error Performance - Comtech EF Data SDM-100A Installation And Operation Manual

SDM-100A Satellite Modem

A.4.2 Error Performance

Raw BER Command:
Response:
Corrected Command:
BER Response:
Rev. 0
<add/RBER_'cr'
>add/RBER_xm.mE-ee'cr''lf']
<add/CBER_'cr'
>add/CBER_xm.mE-ee'cr''lf']
Where:
x = < or > (data modifier to indicate that the error rate is
less than or greater than the returned value).
m.m = 1.0 to 9.9 (error rate mantissa).
ee = 1 to 99 (error rate exponent).
Notes:
1. The 'x' (< or >) parameter is only returned if the error
rate has exceeded the computational resolution of the
system.
2. "No Data" is returned if the error rate cannot be
calculated.
3. "Sampling" is returned if not enough data is currently
available to calculate the error rate.
Where:
x = < or > (data modifier to indicate that the error rate is
less than or greater than the returned value).
m.m = 1.0 to 9.9 (error rate mantissa).
ee = 1 to 99 (error rate exponent).
Notes:
1. The 'x' (< or >) parameter is only returned if the error
rate has exceeded the computational resolution of the
system.
2. "No Data" is returned if the error rate cannot be
calculated.
3. "Sampling" is returned if not enough data is currently
available to calculate the error rate.
Remote Control Operation
A–27