Table of Contents
Advertisement
Operation
M&C Module FW
FPGA Firmware
DSP Firmware
Master Reset
3–76
Displays M&C module firmware version.
Upon entry, the date of release of this firmware will be
displayed. This is a status window only.
Displays firmware version of the Field Programmable
Gate Array (FPGA). Upon entry, the date of release of this
firmware will be displayed. This is a status window only.
Displays the firmware version installed in the Digital Signal
Processor (DSP). Upon entry, the date of release of this
firmware will be displayed. This is a status window only.
Master reset function.
CAUTION
When a hard reset is initiated, the modem hardware is
reset, and default configuration settings will be
installed. When a soft reset is initialized, the modem
hardware will be reset, but the initial firmware
configuration settings will be saved.
Press [ENTER] once to access soft. Press [
alternate between hard and soft until the desired type is
visible. Press [ENTER] to select. If soft has been selected,
press [ENTER] again to reset the modem. If hard is
selected, press [
] until the cursor is on yes, and press
→
[ENTER].
SDM-100A Satellite Modem
] or [
] to
↑
↓
Rev. 0
Advertisement
Table of Contents
