Table of Contents
Advertisement
Remote Control Operation
Common
Command:
Equipment
Response:
Status
E
/N
Status
Command:
b
0
Response:
Modulator
Command:
Rate Status
Response:
Demodulato
Command:
r Rate
Response:
Status
Receive
Command:
Signal Level
Response:
Status
A–20
<add/CES_'cr'
>add/CES_'cr'
M&C_xxx'cr'
INT_xxx'cr'
BAT_xxx'cr'
+5_xxx'cr'
+12_xxx'cr'
-12_xxx'cr'
MODE_xxxxxx'cr'
SFLT_xx'cr''lf']
<add/EBN0_'cr'
>add/EBN0_xnn.ndB'cr''lf']
<add/MR_'cr'
>add/MR_nnnn_mmm.mmm'cr''lf']
<add/DR_'cr'
>add/DR_nnnn_mmm.mmm'cr''lf']
<add/RSL_'cr'
>add/RSL_xsnn.ndBm'cr''lf']
Monitor & Control Module (OK/FLT)
Data Interface Module (OK/FLT)
Battery/Clock (OK/FLT)
+5V Power Supply (OK/FLT)
+12V Power Supply (OK/FLT)
-12V Power Supply (OK/FLT)
Mode (LOCAL or REMOTE)
Number of Stored Faults Logged (0 to 10)
The common equipment status command causes a block of
data to be returned which indicates the status of the common
equipment.
Where:
x = < or > (data modifier to indicate that the E
than or greater than the returned value).
nn.n = 1.0 to 99.9 ( E
/N
b
0
Notes:
1. The 'x' (< or >) parameter is only returned if the E
has exceeded the computational resolution of the
system.
2. "No Data" is returned if the E
3. "Sampling" is returned if not enough data is currently
available to calculate the E
Where:
nnnn = 1/2, 3/4, 7/8, or BP12 (Coder rate).
mmm.mmm = Data rate in kHz.
Where:
nnnn = 1/2, 3/4, 7/8, or BP12 (Decoder rate).
mmm.mmm = Data rate in kHz.
Where:
x = < or > (data modifier to indicate that the receive signal
level is less than or greater than the returned value).
s = + or - (receive signal level sign, plus or minus).
nn.n = 0.0 to 99.9 (receive signal level magnitude).
Notes:
1. The 'x' (< or >) parameter is only returned if the level
has exceeded the computational resolution of the
system.
2. "No Data" is returned if the level cannot be calculated.
3. "Sampling" is returned if not enough data is currently
available to calculate the level.
SDM-100A Satellite Modem
/N
is less
b
0
value).
/N
b
/N
cannot be calculated.
b
0
/N
.
b
0
Rev. 0
0
Advertisement
Table of Contents
