Chapter 9 Operation And Maintenance; Checking The Eternus Dx60/Dx80/Dx90 Status; Backing Up Data - Fujitsu Eternus DX60 User Manual

Chapter 9
This chapter describes various operation, maintenance and troubleshooting related matters.
9.1

Checking the ETERNUS DX60/DX80/DX90 Status

Check the status of the ETERNUS DX60/DX80/DX90 regularly by checking its LEDs, or status
display function of GUI or CLI.
Also, setting the device monitoring enables e-mail notification message or SNMP trap message
of problems with the ETERNUS DX60/DX80/DX90.
Using remote report service enables automatic notification of hardware failure to remote mainte-
nance center and enables problems to be resolved quickly.
9.2

Backing up Data

In case of a system failure, important data should be regularly backed up to a tape drive or
similar device.
P3AM-3042-06ENZ0 ETERNUS DX60/DX80/DX90 Disk storage system User Guide
Operation and Maintenance
Do
CAUTION
• Impending trouble may be indicated by the warning message LEDs
of the ETERNUS DX60/DX80/DX90. The LEDs should be checked
regularly to prevent any serious trouble from occurring.
Do
CAUTION
• We recommend that you backup important data regularly.
If the ETERNUS DX60/DX80/DX90 fails and the data has not been
backed up, it may be lost.
201
Copyright 2010 FUJITSU LIMITED