Disk Installation Positions; Additional Disk Installation Procedure - Fujitsu Eternus DX60 User Manual

Chapter 8 Installing Optional Products
> 8.1 Disk Installation
8.1.3

Disk Installation Positions

This section explains the disk installation positions.
• 3.5" disks
3.5" disks can be installed in the front of the 3.5" type controller enclosure or 3.5" type drive
enclosure, as shown in
Figure 8.1
• 2.5" disks
2.5" disks can be installed in the front of the 2.5" type controller enclosure or 2.5" type drive
enclosure, as shown in
Figure 8.2
8.1.4

Additional Disk Installation Procedure

This section describes how to install additional disks in the ETERNUS DX60/DX80/DX90.
P3AM-3042-06ENZ0 ETERNUS DX60/DX80/DX90 Disk storage system User Guide
Figure
Slot#8 Slot#9
Slot#4 Slot#5
Slot#0 Slot#1
Position of 3.5" disk slots
Figure
Position of 2.5" disk slots
Do Not
WARNING
• Do not install any disks that are not FUJITSU authorized, as they
may damage the device and/or cause fire or electrical shock.
• Do not damage or modify the internal cables or ETERNUS DX60/
DX80/DX90 when installing the disks, as this may damage the
device and/or cause fire or electrical shock.
• Do not remove system disks. Doing so will render the ETERNUS
DX60/DX80/DX90 unusable.
8.1.
Slot#10 Slot#11
Slot#6 Slot#7
Slot#2 Slot#3
8.2.
185
Copyright 2010 FUJITSU LIMITED