Fujitsu Eternus DX60 User Manual page 209

Disk storage system
Hide thumbs Also See for Eternus DX60:
Table of Contents

Advertisement

Chapter 9 Operation and Maintenance
>
9.5 Troubleshooting
When an IP address is forgotten
Set a new IP address according to the following procedure.
Procedure
1
2
3
4
When the ETERNUS DX60/DX80/DX90 is no accessible via the network.
Check the following points:
Is the ETERNUS DX60/DX80/DX90 turned off?
Has the LAN cable become disconnected? For the dual controller model, does the controller
to which the LAN cable is connected have an unlit MASTER LED?
Have any network devices (such as hub or router) failed? Are the network device settings
invalid?
Is the ETERNUS DX60/DX80/DX90 connected using an invalid IP address or the RMT port's
IP address?
Are the environment settings for the network service invalid?
Are the environment settings for the ETERNUS DX60/DX80/DX90 LAN port invalid?
If none of these problems are indicated, return the ETERNUS DX60/DX80/DX90 network set-
tings to their default values.
Procedure
1
P3AM-3042-06ENZ0
ETERNUS DX60/DX80/DX90 Disk storage system User Guide
Remove the front cover of the 3.5" type controller enclosure.
Remove the flange cover of the 2.5" type controller enclosure.
For details on how to attach the front cover, refer to
Cover" (page
75).
For details on how to attach the flange cover, refer to
Flange Cover" (page
78).
Press the IP RESET Switch twice in a row within two seconds.
The setting information related to the network is returned to the factory default.
Set a new IP address and other network information via GUI or CLI.
Write down the newly set IP address on the Network Settings label.
Remove the front cover of the 3.5" type controller enclosure.
Remove the flange cover of the 2.5" type controller enclosure.
For details on how to attach the front cover, refer to
Cover" (page
75).
For details on how to attach the flange cover, refer to
Flange Cover" (page
78).
"3.3 Attaching and Removing the Front
"3.3 Attaching and Removing the Front
209
"3.4 Attaching and Removing the
End of procedure
"3.4 Attaching and Removing the
Copyright 2010 FUJITSU LIMITED

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eternus dx80Eternus dx90

Table of Contents