Operation And Maintenance; Maintenance Support Period; Data Backup - Fujitsu ETERNUS AF250 Setup Manual

Operation and Maintenance

Status check
The status of the ETERNUS AF should be regularly monitored by checking the LEDs and using ETERNUS Web GUI.

Data backup

Important data should be regularly backed up to a tape drive or similar device as a precaution against system failures.

Maintenance support period

The standard maintenance support period for ETERNUS AF is five years from the date of purchase, or is defined in your service
level agreement (SLA). Contact your sales representative for details if you prefer to extend the period.
Operation Guide (Basic)
FUJITSU Storage ETERNUS AF250 All-Flash Arrays Setup Guide
Copyright 2017 FUJITSU LIMITED
FUJITSU Storage ETERNUS AF250 All-Flash Arrays
Issuance responsibility: FUJITSU LIMITED
• The content of this manual is subject to change without notice.
• This manual was prepared with the utmost attention to detail.
However, Fujitsu shall assume no responsibility for any operational
problems as the result of errors, omissions, or the use of
information in this manual.
• Fujitsu assumes no liability for damages to third party copyrights
or other rights arising from the use of any information in this
manual.
• The content of this manual may not be reproduced or distributed in
part or in its entirety without prior permission from Fujitsu.
11
Setup Guide
P3AG-1862-02ENZ0
Date of issuance: April 2017
P3AG-1862-02ENZ0