Fujitsu Eternus DX60 User Manual page 85

Chapter 4 Flow from Installation to Operation
>
P3AM-3042-06ENZ0 ETERNUS DX60/DX80/DX90 Disk storage system User Guide
Other Settings
Perform the following settings (as required).
Advanced Copy Setup
(1)
If the Advanced Copy functions are to be used, set them up.
Refer
"7.3 Advanced Copy Setup" (page 163)
Monitoring Setup
(2)
Perform the ETERNUS DX60/DX80/DX90 monitoring setup if required.
•
Notification of ETERNUS DX60/DX80/DX90 problems as they occur is possible if
the event notification method and level have been set.
•
If e-mail notification of ETERNUS DX60/DX80/DX90 errors is to be used, set a
recipient e-mail address.
•
If the ETERNUS DX60/DX80/DX90 is connected to a PRIMERGY server and the
"ServerView" server monitoring tool is to be used, perform the settings required
for SNMP Trap Transfers.
•
If the Remote Notice function is to be used, perform the settings required to allow
the ETERNUS DX60/DX80/DX90 to connect to a Fujitsu remote server.
Refer
"7.4 Monitoring Setup" (page 169)
Server Connection Setup
(3)
Perform the settings required to connect to the server. Install the drivers and perform
the network settings.
Refer
"7.5 Server Connection Setup" (page 179)
Operation and Maintenance
Refer
"Chapter 9 Operation and Maintenance" (page 201)
85
Copyright 2010 FUJITSU LIMITED