Fujitsu Eternus DX60 User Manual page 130

Chapter 6 Cable Connection
> 6.7 Power Cord Connection
6
P3AM-3042-06ENZ0 ETERNUS DX60/DX80/DX90 Disk storage system User Guide
•
CAUTION
•
Turn the main line switch of the AC outlet box to the "On" position (marked "I").
Main Line Switch
When turning the main line switch to "On" (marked "I") right after
IMPORTANT
turning the main line switch to "Off" (marked "O"), turn it back to "On"
(marked "I") after the STATUS LED of the power supply unit has
turned off completely.
(It takes about ten seconds for the POWER STATUS LED to be
turned off completely.)
Do not overload an electrical outlet. Doing so may lead to
electric shock or fire.
Unplug
If the ETERNUS DX60/DX80/DX90 is not going to be used for
a long period of time, it is advisable to unplug all power cords
to avoid any chance of fire to the ETERNUS DX60/DX80/
DX90 and its peripherals.
130
End of procedure
Copyright 2010 FUJITSU LIMITED