Figure 7.16 [Setup Iscsi Host] Screen - Fujitsu Eternus DX60 User Manual

Chapter 7 Setup
> 7.2 Basic Setup
P3AM-3042-06ENZ0 ETERNUS DX60/DX80/DX90 Disk storage system User Guide
For iSCSI
On the [Setup iSCSI Host] screen, set the iSCSI name, IP address, and other items for the
server being connected to the ETERNUS DX60/DX80.
(1)
Click the [Add] button on the [Setup iSCSI Host] screen
(2)
Specify an iSCSI name, IP address, server name, host response, and CHAP pass-
word.

Figure 7.16 [Setup iSCSI Host] screen

(3)
Specify the other necessary items, and click the [Add] button.
The target iSCSI host is displayed in the "Registered iSCSI Host List" field.
(4)
When adding another iSCSI host, repeat
If another iSCSI host does not need to be added, click the [Done] button.
(5)
Click the [Next >] button.
A confirmation screen appears.
(6)
Click the [OK] button.
The settings are reflected and the [Configure Affinity Group] screen in
Step (2) and
155
Step (3).
Step 5 appears.
Copyright 2010 FUJITSU LIMITED